Harman Kardon Citation Adapt
Den kompakte, trådløse digitale AV-adapter
Getting started with your Harman Kardon Citation Adapt
Documents & Downloads
Specifications
- Strømforsyning
- 100-240v ~ 50/60Hz
- Trådløst netværk
- 802.11a/b/g/n/ac (2,4GHz/5GHz)
- Frekvensområde for 2,4G wi-fi-sender
- 2412 – 2472MHz (2,4GHz ISM Band, USA 11 kanaler, Europa og andre 13 kanaler)
- 2,4G wi-fi-sendeeffekt
- <20dBm
- 2,4G wi-fi-modulation
- DBPSK, DQPSK, CCK, QPSK,BPSK,16QAM,64QAM
- 5G WiSA-sendeeffekt
- <14dBm
- 5G WISA modulation
- OFDM, BPSK, QPSK, 16QAM
- 5G WISA-sender-frekvensområde
- 5,15 - 5,35GHz, 5,470 - 5,725GHz, 5,725 - 5,825GHz
- Strømforbrug i dvaletilstand
- <2.0Watt
- Bemærk
- CITATION ADAPT er beregnet til trådløs afspilning af musik. Man kan afspille musik via Bluetooth på højttaleren. Man kan forbinde sin højttaler til det lokale Wi-Fi-netværk og afspille musik med Google Chromecast. Højttaleren fungerer også sammen med Google Home. Dette produkt er designet til at være tændt med det samme og klar til at afspille musik på et øjeblik. Derfor skal Bluetooth og Wi-Fi være aktivt til enhver tid for at sikre, at produktet fungerer korrekt. CITATION ADAPT er i overensstemmelse med EU's energilovgivning. CITATION ADAPT Den går i standby-tilstand (netværks-standby) efter 20 minutters inaktivitet, hvorefter den kan genaktiveres via Bluetooth eller Wi-Fi.
- Mål (B x H x D)
- 305 x 55 x 155mm (12" x 2.2" x 6.1")
- Vægt
- 1kg (0,46lb)
- Bluetooth-version
- 4.2
- Frekvensområde for Bluetooth-transmitter
- 2402 – 2480MHz
- Bluetooth-sendeeffekt
- <10dBm
- Bluetooth-sendemodulation
- GFSK,π/4 DQPSK, 8DPSK
Smuk Lyd Der Taler Til Dig
Harman Kardon Citation Adapt indvarsler en ny generation af trådløse, digitale AV-modtagere til film og musik. Med sin brugervenlige farveskærm kombinerer den lydtekniske nyskabelser med en sans for design til mindste detalje. Resultatet er et sofistikeret look og en helt trådløs stereolyd, når den parres med Citation Tower eller Citation Sub. Musiknydere vil elske adgangen til over 300 musiktjenester og HD-streaming via Chromecast built-in, ligesom filmfans vil nyde deres helt trådløse hjemmebio-system, hvor Citation Adapt er midtpunktet.
FAQs & How-Tos
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback! -
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00