How To
How To
1640 results
-
There are tons of features that you can use with your Harman Kardon Allure spaeker and Alexa app. We advise going to Amazon's own webpage for more assistance with the Alexa app and what you can do with it. https://www.amazon.com/gp/help/customer/display.html?nodeId=201602230Was this helpful? Thank you for your feedback!
-
It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect AppWas this helpful? Thank you for your feedback!
-
The JBL Tour Pro 2 allows you to find your preferred control method in any scenario. When you want to control your headphones, you no longer need to take your phone out, open the JBL Headphones app and wait for the headphones to connect in the app. All features are accessible directly on the Smart Case, where you can easily select any key feature, you know from the app.
Some of the features you can access on the Smart Case includes playing and pausing your music, skip to the next/previous track, volume adjustment, answer/reject calls, customize the EQ settings, Spatial audio, ANC and Ambient Sound Control, timer & clock, receive notifications, screensavers, and a battery indicator.
Was this helpful? Thank you for your feedback! -
You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
It supports 3 CEC commands; System Standby, OneTouch Play and Audio Return Channel.Was this helpful? Thank you for your feedback!
-
The ML No. 526 uses the ESS SABRE ES9018K2M chip.Was this helpful? Thank you for your feedback!
-
Any device that has Bluetooth capabilities and supports A2DP stereo audio streaming will be compatible with the Under Armour Sport Wireless headphonesWas this helpful? Thank you for your feedback!
-
Because the headphone features a lightning connector, it is compatible with IOS devices only.Was this helpful? Thank you for your feedback!
-
HVS is short for Harman Virtual Surround. This signal processing system can simulate surround effect from a stereo source.Was this helpful? Thank you for your feedback!
-
With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.Was this helpful? Thank you for your feedback!
-
The woven part of the cable is tangle-free, meaning that in daily use, you can put the headphone in your pocket, without having to untangle a cable knot afterwards. Note that the left and right section is smooth, not tangle-free. This is because woven cord would tend to make noise when rubbing against clothes.Was this helpful? Thank you for your feedback!
-
The product + indicates splashproof.Was this helpful? Thank you for your feedback!
-
Audio feedback turns on tones that let you know that something is happening on the product. When Audio feedback is ON, you will hear tones for: 1: Bluetooth Pairing. 2: SoundShift on/off. 3: JBL Connect Pairing Mode (Boost TV only)Was this helpful? Thank you for your feedback!
-
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.Was this helpful? Thank you for your feedback! -
During charging, the LED lights red constantly. When it is fully charged, the LED goes out. No light.Was this helpful? Thank you for your feedback!
-
There is a constant red light in the LED while charging takes place. When charging is complete, the diode goes dark.Was this helpful? Thank you for your feedback!
-
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.Was this helpful? Thank you for your feedback! -
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.Was this helpful? Thank you for your feedback!
-
The sound feedback is the tone you hear when you send a command to the soundbar. This confirmation tone can be switched off, if you do not want it to be heard.Was this helpful? Thank you for your feedback!
-
The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)Was this helpful? Thank you for your feedback!
-
If the headphones and source device do not pair:
1. Make sure the headphones are NOT connected to the charger. Cycle power switch OFF and ON.
2. Turn Bluetooth® OFF, then ON again on the source device.
3. Turn OFF Bluetooth® feature on any other device that is paired with the headphones.
4. Press and Hold the ON/OFF button for >5 seconds until white status light pulses.
5. Make sure “No 5909" is selected in the Bluetooth® source device list.
Was this helpful? Thank you for your feedback! -
All products must be on Wi-Fi 5GHz network, and you need two additional OMNI+ speakers of the same model (2 x OMNI 20+ for example) to create 5.1 wireless surround sound.Was this helpful? Thank you for your feedback!
-
The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.Was this helpful? Thank you for your feedback!
-
(+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.Was this helpful? Thank you for your feedback!
-
Here is a list of what the LED lights mean. Light OFF: Power OFF, no charger connected, OR charger connected, fully charged. RED light ON: Power OFF, charger connected and charging. BLUE light flashing: Power ON, no Bluetooth connected. Constant BLUE light: Power ON, connected to Bluetooth device. RED/BLUE light flashing: Power ON, in pairing mode. RED light flashing: Power ON, low battery.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
All of the surround mode functions in our devices work in different ways, and some might be useful in certain situations. Here is a list of each mode, explained with more details. HVS surround mode: Is the abbreviation for HARMAN Virtual Surround. It will process the signal to simulate a surround effect from a stereo source. DSP Bypass: Surround Off (DSP or Analog Bypass) = 2 CH STEREO. When this mode is selected, the BDS will pass the analog source material directly through to the front left and right speakers, bypassing the digital processing circuitry. Stereo mode: Turns off all surround processing and plays a pure two-channel signal or a downmix of a multichannel signal. The signal is digitized and bass management settings are applied, making it appropriate when a subwoofer is used. Pulse-code modulation (PCM): This method is used to digitally represent sampled analog signals, and two channels (stereo) is the most common format. PCM Stereo is what standard Audio CDs always use. Dynamic Range Control: This setting makes the loud and quiet parts of a movie or music sound closer to the same volume (a process known as compression). Compression lets you turn up the volume so you can hear the quiet parts without the loud parts disturbing other people. NOTE: This feature works only with Dolby Digital programs that have been specially encoded. Three settings are available: •• Off: Never applies compression. Use this setting when the volume may be as loud as you desire. •• On: Always applies compression. Use this setting when you want the volume to be as quiet as possible without making it difficult to hear spoken dialogue. •• Auto: Applies compression based on information encoded within the Dolby Digital bit-stream. The receiver will selectively apply compression only during the most dynamic parts of the soundtrack.Was this helpful? Thank you for your feedback!
-
You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
The JBL Headphones app provide the following functions:
Equalizer setting
Auto on/off
Microphone gain settings
Battery life status
Noise suppression level
LED brightness setting
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
