How To

Yes, hold down the Volume and Bluetooth buttons at the same time. A voice will call out some numbers, and that is the software version on your AURA Studio.

Yes, press Volume - and Connect button at the same time for 5 seconds. A voice reads out a set of numbers, which is the current software version. Using the HID Software Tool, available in the Manuals & Downloads section, you can find out if an update exists, and if so, install the update.

Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.

Yes, in the HDMI Setup Menu, you can select either Sound To TV or to Amp, (which is the AVR 70). This detail is not mentioned in the owner's manual.

SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.

Yes, you can definitely connect two wired devices at the same time. However, the Boost TV will only pass one connection at a time. If two connections are playing at the same time, the optical device will take priority.

No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect

Yes. Connect Bluetooth or auxiliary. Remember that Bluetooth can only work if the source supports A2DP stereo audio streaming, which may not be the case for all computers.

Yes. Bluetooth or Auxiliary.

You can connect up to 3 Bluetooth devices at the same time. In case you are listening to music via Bluetooth, each device will override the other when a command (play) is selected.

No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.

No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.

Yes. 2 speakers can connect together playing the same music from a single source. This is the Wireless Dual Sound feature.

No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tablet

Yes. An auxiliary splitter would be required to connect multiple speakers wired utilizing the auxiliary audio inputs.

No, that is not possible. You can only connect it to WiFi through the settings menu of the BDS. Find your WiFi network and type in password, then your BDS is connected to the network. Or you can use LAN connection.

Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.

Yes, provided that your computer supports A2DP Stereo audio streaming over Bluetooth, you can connect to JBL EON 208P and EON ONE. If your computer can connect to a mouse, a keyboard or a printer with Bluetooth, but not the EON speaker, please check if A2DP is supported. If it is not, ask the provider or manufacturer of your computer how to establish A2DP support.

No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.

It is not possible to connect the Citation Multibeam 1100 to the Citation Towers.
 

Yes, Once you've added your UA Sport Wireless Heart Rate to the UA Record mobile app any workout started on your UA Band will automatically connect to the headphones if powered on and present. The Band will indicate the heart rate sensor is connected and begin showing your heart rate zones using the color LED on the side of the Band.

To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.

Yes, these headphones can be connected and paired to two devices at the same time.

Yes. The E45/E55BT headphones have the ability to pair and connect to two devices at the same time.

Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.

Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.

An auxiliary splitter would be required to utilize the audio input auxiliary connections.

Citation will work with any smart home or iOT device labeled Works with Google Assistant. Visit http://assistant.google.com to learn more.

Yes, with OMNI+ you can add speakers to both bands, but your smart device is not required to be on the same band, just be sure they are on the same network.

Yes, download the Harman Kardon Remote app to do this.