JBL Quantum Stream Talk
USB-streamingmikrofon
Sold from 2023 until now
Getting started with your JBL Quantum Stream Talk
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Strøm påkrævet/forbrug
- 5 V ⎓ 500 mA
- Frekvensområde
- 50 Hz - 12 kHz
- Følsomhed
- -47± 3 dB (1 kHz@1 Pa, 0 dB = 1 v/Pa)
- Maksimal SPL
- 110 dB
- Samlingfrekvens
- 44.1kHz / 48kHz / 96kHz
- Bithastighed
- 16/24 bits
- Kapsler
- 6 mm Electret-kondensatormikrofon
- Polære mønstre
- Super-kardioide
- Forstærkerimpedans for hovedtelefoner
- 16 ohm/32 ohm
- Hovedtelefoners udgangseffekt (RMS)
- 23 mWrms pr. kanal (belastning = 32 ohm)
- Hovedtelefoner THD (THD/total harmonisk forvrængning)
- <0,5 % (belastning = 32 ohm)
- Hovedtelefoners frekvensområde
- 20 Hz - 20 kHz
- Hovedtelefonernes signal-støj-forhold
- 92 dB (A-vægtet)
- Dimensioner for mikrofon med stativ (L x B x H)
- 10,5 cm x 10 cm x 18,5 cm
- Mikrofonens vægt med stativ
- 146 g
Lyd er overlevelse Lad din stemme blive hørt
Uanset om du streamer dine spil på Twitch eller podcaster med et voksende publikum, sørger JBL Quantum Stream Talk for, at din stemme bliver hørt. Det superkardioide opfangningsmønster i dette slanke, funktionelle design gør det perfekt til en enkelt stemme, hvilket sikrer, at tilfældige lyde andre steder i rummet ikke bliver hørt. En indbygget støddæmper i det robuste mikrofonstativ hjælper også med at sikre, at dine streams og optagelser er så støjfrie som muligt. Overvåg lydstreamingen i dine hovedtelefoner via 3,5 mm-forbindelsen og multifunktionskontrolknappen, som også justerer mikrofonens forstærkning og lydstyrke og hurtigt dæmper dig, hvis der hostes eller nyses. Brug den medfølgende JBL QuantumENGINE PC-software til at justere EQ, anvende støjreduktion og udføre en hurtig mikrofontest, alt sammen fra din computerskærm.
FAQs & How-Tos
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
Sidetone is off by default.
To enable sidetone on your JBL Quantum Stream microphone, install and start JBL QuantumENGINE, and head to the "Microphone" tab.
Here you can select sidetone level from 0 to 3 (0 = off).
Was this helpful? Thank you for your feedback! -
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
Try to move the microphone closer to the sound source and adjust it for a better angle. You should also try to increase the microphone volume to an appropriate level by turning the volume up.
Finally, try to increase or decrease the microphone gain level if the sound is distorted.Was this helpful? Thank you for your feedback! -
In every microphone there are polar patterns that describes the microphone directionality. Different polar patterns describe how well the microphone module picks up sound waves coming from different directions.
There are four different polar patterns which can be used for different situations. The Cardioid pattern is the best option when you are recording on your own. The Omni-directional pattern is the most suitable for recordings with multiple people from different directions. The Stereo pattern is most optimal when two people are sitting next each other or playing an instrument during a recording. The bidirectional pattern works the best when two people are sitting opposite each other.
Was this helpful? Thank you for your feedback! -
If your teammates can not hear you, make sure of the following:
USB is correctly plugged in
Only one voice chat application is in use while in-game.
The mic input is set to JBL Quantum Stream.
Mic gain is not turned all the way down
Mic is not muted (mute/unmute by pressing the touch panel on top of the mic). By default the RBG will indicate red for muted, and green for unmuted(active).Was this helpful? Thank you for your feedback! -
JBL Quantum 300, 350, 360P/X, 400, 600, 610, 800, 810, 910, 910 P/X, ONE, TWS, TWS Air, Stream, Stream Talk, Stream Studio and Stream Wireless are working with the QuantumENGINE.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
