JBL PartyLight Stick
PartyLight Stick med Bluetooth synkroniserer trådløst med JBL PartyBox-højttalere. Oplev et større koreograferet lysshow med flere PartyLight Sticks for at få en fascinerende visuel oplevelse.
Sold from 2024 until now
Getting started with your JBL PartyLight Stick
Documents & Downloads
Specifications
- LED
- RGB x 183 stk.
- Strømforbrug
- Maks. 10 W
- Spilletid
- Op til 8 timer
- Bluetooth-version
- 5.3
- Bluetooth-modulation
- GFSK
- Frekvensområde for Bluetooth-sender
- 2400 MHz - 2483,5 MHz
- Bluetooth-sendeeffekt
- < 12 dBm (EIRP)
- Produktets dimensioner (B x H x D)
- 217 mm x 1081 mm x 217 mm
- Nettovægt: 1,15 kg
- Pakkens dimensioner (B x H x D)
- 1060 mm x 228 mm x 117 mm
- Bruttovægt
- 2,44 kg
- Batteritype
- Litium-ion-batteripakke 9,0 Wh (svarende til 3,6 V 2500 mAh)
- Batteriopladningstid
- <3 timer
- USB-opladning, indgang
- 5 V / 2 A
- USB-kabellængde
- 90 cm
Lys natten op
Fortryl dine festdeltagere med JBL PartyLight Stick. Det farverige, energiske festlys synkroniseres øjeblikkeligt med alle JBL PartyBox-højttalere, så din indendørs eller udendørs fest forstærkes med et pulserende, farverigt 360-graders LED-lys. Forstærk din fest med alt fra afslappende gløder til total mani på dansegulvet med justerbar bevægelse, hastighed og intensitet. Det hele styres nemt med JBL PartyBox-appen. Produktet er IPX4-stænksikkert og kan sættes op på under et minut. Det trådløst genopladelige batteri med 8 timers kapacitet holder lige så længe som din fest. Dine gæster vil føle sig teleporteret ind i en futuristisk musikvideo.
FAQs & How-Tos
-
You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.
The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.
Was this helpful? Thank you for your feedback! -
For the best PartyLight Stick and PartyLight Beam performance, connect it by using a JBL Auracast™-enabled PartyBox models such as the PartyBox Club 120, Stage 320 and Ultimate.
Was this helpful? Thank you for your feedback! -
Hold the "Light" button for more than 2 seconds to reset the JBL PartyLight Beam.
Hold the "Light" button for more than 10 seconds to reset the JBL PartyLight Stick.
Was this helpful? Thank you for your feedback! -
To charge the PartyLight Stick you need a charger with at least 5V/2A output. You can use the PartyLight Stick while it's charging.
The playtime for the PartyLight Stick is up to 8 hours. The playtime can vary depending on light, brightness, music, and environmental conditions. The playtime will also decrease if the backlight is turned on as this consumes more energy.
You can always check the battery level by pressing the power button twice. The white light on the PartyLight Stick will indicate the battery level. A red light indicates the battery level is low.
Was this helpful? Thank you for your feedback! -
In Standard mode, an unlimited number of PartyLight Sticks or PartyLight Beams can be connected to a PartyBox.
Stage mode can be switched on via the JBL PartyBox app.
In Stage mode at least 4 lights and a maximum of 32 Sticks can be connected to a PartyBox.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00