JBL Flip 3
Stænksikker bærbar Bluetooth-højttaler med kraftfuld lyd og højttalertelefonteknologi
Sold from 2015 until 2017
| Predecessor Product: | JBL Flip 2 |
|---|---|
| Successor Product: | JBL Flip 4 |
Getting started with your JBL Flip 3
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Udgangseffekt (W)
- 2 x 8
- Signal til støj-forhold
- ≥80 dB
- Frekvensområde
- 85 Hz – 20 kHz
- Mål (cm)
- 6.4 x 16.9 x 6.4
- Mål (inch)
- 2.5 x 6.7 x 2.5
- Vægt (kg)
- 0.45
- Vægt (lbs)
- 0.99
- Bluetooth-version
- 4.1
- Batterikapacitet (mAh)
- 3,000
- Ladetid (timer)
- 3.5
- Spilletid (timer)
- 10
- 3,5 mm lydindgang
- Ja
- Auto-sluk
- Ja
- Bluetooth
- Ja
- Stænksikker
- Ja
- Wireless
- Ja
- JBL Connect
- Ja
- Højttalertelefon
- Ja
- Transducer
- 2 x 40mm
All purpose, all weather companion
JBL Flip 3 er næste generation i den prisbelønnede Flip-serie. Det er en omfattende bærbar Bluetooth-højttaler, som leverer overraskende kraftfuld stereolyd, der fylder hele rummet. Denne super kompakte højttaler drives af et 3000 mAh genopladeligt li-ion-batteri, der giver op til 10 timers kontinuerlig stereolydafspilning i høj kvalitet. Flip 3 er beklædt med et slidstærkt, stænksikkert stofmateriale, der fås i otte livlige farver, og er den perfekte ledsager til al slags vejr, som integrerer musik i alle aspekter af dit liv – fra bordpladen til poolen, fra solrige morgener til regnfulde nætter. Flip 3 har også en indbygget højttalertelefon, der reducerer støj og ekko, til krystalklare konferenceopkald, og JBL Connect-teknologi, der trådløst kan forbinde flere JBL Connect-aktiverede højttalere for at forstærke lytteoplevelsen.
Forbind op til tre smartphones eller tablets til højttaleren trådløst, og I kan skiftes til at afspille forbløffende krafttuld stereolyd, som fylder hele lokalet.
Indbygget genopladeligt Li-ionbatteri med op til 10 timers spilletid.
Besvar opkald i krystalklar kvalitet fra din højttaler med et tryk på en knap takket være den støj- og ekkoeliminerende højttalertelefon.
Stænksikker betyder, at du ikke længere behøver at bekymre dig om regn eller stænk – du kan tilmed rengøre enheden under rindende vand. Undlad dog at nedsænke den i væske.
Opbyg dit eget økosystem ved at sammensætte flere JBL Connect-kompatible højttalere for en endnu stærkere lytteoplevelse.
Med holdbare materialer og et robust gummikabinet kan du tage højttaleren med på alle dine eventyr.
Få adgang til Siri eller Google Now fra din JBL-højttaler med et enkelt tryk på knappen.
FAQs & How-Tos
19 results
-
This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.Was this helpful? Thank you for your feedback!
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
Yes, after approximately 10 minutes of no activity and no audio, the unit goes into sleep mode. It must be awakened with the ON/OFF Button. It is not possible to wake it up with a Bluetooth pairing signal. After 20 minutes of no activity and no audio, the unit will power off.Was this helpful? Thank you for your feedback!
-
Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.Was this helpful? Thank you for your feedback!
-
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.Was this helpful? Thank you for your feedback!
-
Make sure your device is paired with a mobile device. When receiving a call, press the phone button to answer the call. You can now use it as a speakerphone.Was this helpful? Thank you for your feedback!
-
In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself.
Now the unit is reset to factory default.
Was this helpful? Thank you for your feedback! -
With the Flip3 ON, press the Bluetooth briefly to enter pairing mode, while another BT source that is already connected plays on. Now two sources can take turns playing, just by pressing play on one, then the other. The one being overridden will enter pause mode. For complete Bluetooth reset, while the Flip3 is ON and paired, press and hold the Bluetooth button for more than 3 seconds. The Bluetooth button light goes out, and the connection is broken. Press the Bluetooth button again for new pairing.Was this helpful? Thank you for your feedback!
-
No, all recordings made on the telephone will be using the telephone's built-in microphone. Replay of the recording will be heard over the speaker afterwards, though, as long as it is paired to the telephone.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
