Harman Kardon Citation MultiBeam™ 700
Den mest intelligente, kompakte soundbar med Multibeam™ surroundlyd
Getting started with your Harman Kardon Citation MultiBeam™ 700
Documents & Downloads
Specifications
- Bemærk
- CITATION MULTIBEAM 700 er i overensstemmelse med EuropaKommissionens forordning (EF) nr. 1275/2008 og (EU) nr. 801/2013.
- Strømforbrug:-
- Slukket-tilstand
- Ikke relevant
- Standby
- Ikke relevant
- Netværksstandby*
- 2,0 watt
- Tid til standby i netværk
- 18 minutter *
- Netværksstandby
- Hvis nogle af enhedens trådløse forbindelser aktiveres, men der ikke leveres lyd- eller videosignal til enheden, vil den automatisk sættes på netværksstandby efter 18 minutter.Enhver genaktivering af lyd- eller videosignalet vil bringe enheden fra standby til driftstilstand.
- Transducer
- 2 x 25mm diskant, 5 x 50mm bas
- Udgangseffekt
- 210W RMS
- Signal til støj-forhold
- > 80 dB
- Mål (B x H x D)
- 790 x 65 x 130 mm
- Vægt: 3,7 kg
- Bluetooth® version
- 4.3
- Frekvensområde for Bluetooth-transmitter
- 2402-2480 MHz
- Bluetooth-sendeeffekt
- < 10 dBm
- Bluetooth-sendemodulation
- GFSK,π/4 DQPSK, 8DPSK
- Trådløst netværk
- 802.11 a/b/g/n/ac (2,4GHz/5GHz)
- Frekvensområde for 2,4G wi-fi-sender
- 2412 – 2472MHz (2,4GHzISM-bånd, USA 11 kanaler, Europa og andre steder 13 kanaler)
- 2,4G wi-fi-sendeeffekt
- < 20 dBm (EIRP)
- 2,4G wi-fi-modulation
- DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
- 5G wi-fi-sendeeffekt
- < 23 dBm
- 5G wi-fi-modulation
- QPSK, BPSK, 16QAM, 64QAM, 256QAM
- Frekvensområde for 5G wi-fi-sender
- 5,15 - 5,35GHz, 5,470 - 5,725GHz, 5,725 - 5,825GHz
- Strømforsyning
- 100-240 V~50/60 Hz
- Strømforbrug i dvaletilstand
- < 2.0 Watt
- Google, Google Play, Chromecast, Chromecast built-in, Google Home og andre relaterede mærker og logoer er varemærker tilhørende Google Inc.
- -
- Chromecast built-in kan kræve abonnement(er).
- -
- Varemærket Bluetooth® og de tilhørende logoer er registrerede varemærker tilhørende Bluetooth SIG, Inc., og enhver brug af sådanne mærker af HARMAN International Industries, Incorporated, foregår under licens. Andre varemærker og varebetegnelser tilhører deres respektive ejere. Wi-Fi CERTIFIED-logoet er et certificeringsmærke tilhørende Wi-Fi Alliance.
- -
- * Kræver kompatibel enhed. Tilgængelighed og ydeevne for visse andre funktioner og tjenester er service-, enheds- og netværks-afhængige, og muligvis ikke tilgængelig i alle områder; abonnement(er) kan være påkrævet, og yderligere vilkår, betingelser og/eller gebyrer kan finde anvendelse.
- -
- Produceret under licens fra Dolby Laboratories. Dolby og dobbelt-D-symbolet er varemærker tilhørende Dolby Laboratories.
- -
- Begrebet HDMI, HDMI-logoet og High-Definition Multimedia Interface er varemærker eller registrerede varemærker tilhørende HDMI Licensing LLC i USA.
- -
- Funktioner, specifikationer og udseende kan ændres uden varsel.
- -
Smuk lyd, der taler til dig
Elegant, dynamisk og kraftfuld. Harman Kardon Citation MultiBeam™ 700 leverer fuld surroundlyd til dit TV uden behov for yderligere højttalere og kabler. Som uafhængig soundbar projekterer den rig lyd til alle hjørner i rummet. Du kan endda styre oplevelsen med din stemme takket være Google Assistent. Når den er parret med resten af Citation-serien, kan Citation MultiBeam 700 også fungere som en centerkanal i den ultimative hjemmebiograf med fyldig, detaljeret surroundlyd. Du får nem adgang til mere end 300 musikstreaming-tjenester med AirPlay og Chromecast built-in. Oplev smuk lyd under alle forhold.
FAQs & How-Tos
-
CITATION MULTIBEAM 700
Software Update Release Notes
------------------------------------------------------------------------
Version: 93690 / MCU: 0.2122.5
Release Date: August 22, 2022
Release Media: OTA (over the air) Automatic Upgrade
What’s New- Fixed a grouping issue with other Chromecast built-in speakers
- Resolves the issues with the "Google Home" app when used with an Android device
- Improved HDMI compatibility with some TV's
- Current bass level is now shown on screen when adjusting with the remote control
- Other bug fixes and improvements
Was this helpful? Thank you for your feedback! -
For Citation ONE, Citation 100, Citation Sub and Citation Surround, Press and hold the RESET button on the speaker for 5 seconds. For Citation 300, Citation 500, Citation Bar and Citation Tower, Press and hold the RESET button on the speaker for 5 seconds, or select the Factory Reset option in the touch screen settings menu.Was this helpful? Thank you for your feedback!
-
Before starting, remove any interference that might be blocking the Soundbar side-firing speakers. Any ambient noise or sounds that could disrupt the calibration needs to be out of the room. After completing the initial setup in Google Home app, select the Settings screen on the touch display of the product. Select "Speaker Setup", and then "Calibration". Follow the directions in the display to perform the calibration. A series of tone sweeps/chirps will play in all directions, and the calibration process will finish within approx. 30-40 seconds. Calibration is done! In case you are moving the soundbar you will need to calibrate the sound again.Was this helpful? Thank you for your feedback!
-
Daily Care instructions for Citation speakers fabric (wool) Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years. Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself! Many types of stain can be removed using warm water with a microfiber cloth (not too wet). Stain removal guide If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains. Here is how to do it. First, soak up the liquid with an absorbent napkin or Microfiber cloth. For dried stains use a spoon to roughen the surface. To avoid the stain spreading further start from the edge of the stain working towards the middle. WARNING! Be careful when using solvents, because these could dissolve the upholstery material beneath. Regular and normal cleaning Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth. When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric). General information These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device. In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker. HARMAN do not have any recommended companies or partners to redirect any customers too. For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below: https://kvadrat.dk/care-and-maintenance/upholsteries https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf There are a lot of information about the fabric we are using and you can contact them for further information.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback! -
"In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback. If you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."Was this helpful? Thank you for your feedback!
-
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00