JBL LINK VIEW
Den legendariske JBL-lyd i et smart-display med Google Assistent.
Sold from 2018 until now
Getting started with your JBL LINK VIEW
Documents & Downloads
Specifications
- Enhed
- 2 x 51 mm (2 tommer) fuldspektrum-enheder
- Udgangseffekt
- 2 x 10 W RMS
- Frekvensområde
- 60Hz-20kHz (-6dB)
- Signal-støj-forhold
- >80 dBA
- Strømforsyning
- 100-240 V~50/60 Hz
- 5 MP fremadvendt kamera
- Otte tommers HD touch-skærm
- Bluetooth-version
- 4.2
- Frekvensområde for Bluetooth-sender
- 2402-2480 MHz
- Bluetooth-sendereffekt
- ≤10 dBm (EIRP)
- Bluetooth-sendermodulation
- GFSK, π/4-DQPSK, 8-DPSK
- Trådløst netværk
- 802,11 b/g/n/ac (2,4 GHz/5 GHz)
- 2,4G WiFi-senders frekvensområde
- 2412-2472 MHz (2,4 GHz ISM bånd, USA 11 kanaler, Europa og andre 13 kanaler)
- 2,4G WiFi-sendereffekt
- < 20 dBm (EIRP)
- 2,4G WiFi-modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 5G WiFi-sendereffekt
- < 20 dBm (EIRP)
- 5G WiFi-modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM, 256QAM
- 5G WiFi-senders frekvensområde
- 5,15 - 5,35 GHz, 5,470 - 5,725 GHz, 5,725 - 5,825 GHz
- Mål (B x H x D)
- 332 x 152 x 100 mm
- Bruttovægt
- 1,9 kg
- Nettovægt
- 1,3 kg
- Note
- Den integrerede skærm på JBL Link View gør det nemt for dig at få tingene gjort. Ifølge definitionen på forbundet udstyr med høj netværkstilgængelighedsfunktion, som defineret i kommissionsforordning (EU) nr. 801/2013 og ændret den ændrede Forordning (EC) nr. 1275/2008, betragtes produktet som netværksudstyr med funktion som en videofon. Derfor er JBL Link View fritaget for kravene vedrørende tilgængelighed af standby/slukkede tilstande, strømadministrationsfunktion og mulighed for deaktivering af trådløse netværksforbindelser. Hvis disse krav findes, er de ikke i overenstemmelse med hensigten med brugen af produktet. JBL Link View er i overensstemmelse med den Europæiske Unions energikrav. JBL Link View er i aktiv standbytilstand, så snart produktet er forbundet med en stikkontakt på væggen.
- Aktivt standbyforbrug
- <4.3 watt.
- Frequency response
- 60Hz-20kHz (-6dB)
- Signal-to-noise ratio
- >80dBA
- Dimensions (W x H x D)
- 332 x 152 x 100mm
- Bluetooth version
- 4.2
- Bluetooth transmitter frequency range
- 2402 – 2480MHz
- Bluetooth transmitter power
- ≤10dBm (EIRP)
- Bluetooth transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- Wireless network
- 802.11b/g/n/ac (2.4GHz/5GHz)
- Power Supply
- 100-240V~50/60Hz
Legendarisk lyd. Nu på smart-display med Google Assistent.
Få mere end bare legendarisk lyd. Med det integrerede display på JBL LINK VIEW får du let tingene gjort. Du får også den indbyggede Google Assistent, som du kan stille spørgsmål og bede om at gøre ting. Bare sig "Hey Google" for hurtigt at komme i gang med at nyde din underholdning, holde forbindelsen til dine nærmeste, håndtere daglige opgaver og styre dit smarte hjem. Din Assistent giver dig frie hænder og mere tid, så du kan fokusere på det, der betyder mest. Du kan f.eks. se videoer fra dine yndlingskanaler på YouTube, genopleve minder fra din seneste ferie, foretage et videoopkald til din bedste ven, modtage trin-for-trin opskrifter til lækre chokoladesmåkager eller dæmpe lyset til din filmaften. Alt dette leveres via en specialudviklet JBL transducerenhed, som drives af en digital forstærker, der er fintunet til at levere fyldig bas og krystalklar diskant. Den imponerende kombination af Google Assistent, kraftfuld JBL-lyd og HD-display gør JBL LINK VIEW uundværlig til dit hjem eller kontor.
FAQs & How-Tos
-
1. Open the Google Home app 2. Select the LINK VIEW 3. Select SETTINGS. 4. There is a line that says Paired Bluetooth Devices. 5. When you select it, it gives you the option to ENABLE PAIRING MODE. 6. Use your voice - "Hey Google, Open Bluetooth" and LINK VIEW will enable Bluetooth connection. You can disable Bluetooth using "Hey Google, Close Bluetooth" Once you have enabled Bluetooth pairing mode on your LINK VIEW, simply go into your Bluetooth settings menu on your mobile device and connect.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback! -
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00