Arena 130

Arena 130

tovejs reolhøjttalere

Sold from 2015 until now

Getting started with your Arena 130

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Weight (kg)
6.1
Recommended Amplifier Power
20 - 125W
Weight (lb)
15.4
Crossover Frequencies
2kHz – 18 dB/octave
Nominal Impedance
8 Ohms
Frequency Response
55 Hz - 40 kHz
Sensitivity
87 dB
Weight (kg)
6.1
Height (in)
15
Depth (mm)
270
Weight (lb)
13.5
Depth (in)
10-5/8
Width (mm)
219
Width ( in)
8-17/32
Height (mm)
381

A high-performance loudspeaker at a cost that isn’t earsplitting

Visse ting er både kraftfulde og til at betale. Se bare de nye JBL Arena 130 reolhøjttalere. Hvem andre end JBL's ingeniører kunne skabe en højttaler, hvor stor lyd, HD-detaljering og moderne elegance følges ad til en lav pris? Arena 130 har en 7" (178 mm) basenhed i polycellulose og en 1" (25 mm) blød dome-diskant, som sammen skaber en banebydende ydelse, der både er kraftfuld og livagtig.

HDI-bølgeretningsteknologien (High Definition Imaging) er hentet fra den legendariske JBL M2 Master Reference MonitorComputeroptimeret enhedsplacering og netværksintegration sikrer perfekte præstationer og et livagtigt lydbilledeGennemprøvet akustisk overlegenhed takket være omfattende test og evaluering fra den virkelige verden
7" (178 mm) polycellulose-basenhed leverer den kendte JBL-lyd, der får musik, tv-programmer, film og spil til at fylde hele rummet1" (25 mm) blød dome-diskant giver klarhed og kraft til de høje tonerOplev banebrydende lyd-præcision i tv-udsendelser, film og spil
Moderne kabinetdesign med vinklet side og toppaneler giver et sofistikeret, moderigtigt lookBerøringsvenlig lakering omkring transducere og bølgeretningFås i sort og hvid finish, der understreges af minimalistiske gitre og detaljer i børstet metal
Den perfekte treenighed af JBL-kræfter, præcision og en attraktiv pris.
Beregnet til brug sammen med hele serien af JBL Arena-højttalere: to gulvhøjttalere, to reolhøjttalere, en centerhøjttaler og en subwoofermodel.

FAQs & How-Tos

3 results
  • Often, hum is caused by a ground loop. This is a problem that is sometimes created when connecting two or more electrical components together. Sometimes the problem does not lie in any one particular unit, but in how they're connected. If your subwoofer is connected to a different wall outlet than your system, try to move the subwoofer plug to the same outlet. This may require an extension cord just for the trial. If it works, you can permanently move the sub or use an extension cord. However, if the hum you are hearing is coming from inside the sub, or if it is constant even when nothing is connected to the inputs of the sub, there is something wrong with the sub and you should bring it in for service.
  • There are two ways to blow speakers. The first is the one we all know and understand. If you pump 500 watts into a speaker that is only rated at 100 watts, kaboom, it blows up. As a result, very few of us do this. So then why are all of these poor, helpless speakers blowing up? Because of the second reason, under-powering. It's really a misleading term, but let's try to explain. First let's take it to the maximum. Example: You have a 1000 watt speaker and a 100 watt amplifier. The way you like to listen to music requires 300 watts. Typically, you will ask your amp to put out that 300 watts that you want to hear. The amp will do it, but it will clip and distort. Unfortunately, the human ear can't hear distortion until it reaches almost 10%. By that time it's usually too late. The speaker keeps trying to reproduce this distortion that it's not capable or reproducing and eventually it blows (usually the tweeter fails first). If you are blowing speakers with an amp that has a power rating lower than your speakers, you are pushing your amp too far, causing it to clip, and blowing speakers. If you are pushing your system too hard, it is suggested that you realize your systems limitations or recommend that you get a more powerful amplifier. Please realize, if you only buy speakers that will handle more power and not a more powerful amplifier, you won't solve the problem. The speakers will still blow, because it is distortion that is blowing them, not too much power.
  • "You can attached these spikes to your Arena 170 & Arena 180 at the bottom of the speaker. Use them for stability if you are placing your Arena 180/170 speakers on a thick rug or plush carpeting. The carpet spikes can be manually screwed into each foot on the base of the speaker."

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00