How To
How To
435 results
-
Yes, press and hold the Surround button on the OMNI BAR+ until it starts to blink amber. You are now in pairing mode. Press Volume+ on your OMNI BAR+, then press Volume+ on your remote control. The surround button will quickly flash white, to indicate it has learned Volume+. Repeat for Volume-, and Mute, and then hold down the Surround button to exit remote control learning.Was this helpful? Thank you for your feedback!
-
No, since the OMNI BAR+ does not have any HDMI input connections, it is only your source, connected to the TV, (and of course your TV) that need to be 4K compatible.Was this helpful? Thank you for your feedback!
-
The JBL QuantumENGINE supports Windows 10 release 1909 and above and Windows 7 Service Pack 1.Was this helpful? Thank you for your feedback!
-
Yes, the Boombox plays at 3,5dB higher volume than the JBL Xtreme. This results in a 150% volume increase, compared to the JBL XtremeWas this helpful? Thank you for your feedback!
-
No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can write text messages to your Amazon friends via the Alexa app.Was this helpful? Thank you for your feedback!
-
Harman Kardon Allure/portable will only work in selected countries such as United States, Germany, United Kingdom and soon France. To use the Allure on your network requires two different apps. 1. HK Alexa setup - To connect it to your Wi-Fi network (Only available in the countries above) 2. Amazon Alexa app - To control Alexa and add streaming services to your Allure speaker. However, in some countries, French, German or English is spoken, but you still cannot use the Allure, because the Amazon Alexa app cannot be downloaded. This is a decision made by Amazon. The Alexa app is only available in some countries, and this is not only dependent on language. Therefore, if you plan on buying an Allure speaker, and have it shipped to a country outside the selected regions, you will not be able to use it on Wi-Fi, and Alexa voice commands will not work. Only Amazon knows if and when they will extend the app availability to more countries.Was this helpful? Thank you for your feedback!
-
No, the Flip 3 Stealth Edition does not support JBL Connect or Connect+. The Stealth edition can not be paired with other JBL devices.Was this helpful? Thank you for your feedback!
-
Yes, both the AAC and the aptX codecs are supported. aptX HD and aptX Low Latency are not supported. Please note that N5005 is an in-ear headphone capable of extremely high audio reproduction quality. Wireless transmission cannot deliver the quality that a first-class analog, cabled signal can. The best possible quality is available with the balanced 4-pole 2.5 mm jack, connected directly to a highest-quality headphone amplifier that supports this connection, fed by the highest quality source.Was this helpful? Thank you for your feedback!
-
No the audio cable included with the Everest series headphones has a one-button remote control with microphone. It does not have volume buttons. It can perform pause/play, and gives you the ability to answer and hang up phone calls. However, you can control the volume when the headphones are connected to a source device with Bluetooth, using the buttons on the ear cup.Was this helpful? Thank you for your feedback!
-
Yes, you can adjust game and chat audio balance by rotating the puck clockwise and anti clockwise. When rotating the puck, you will feel a notch in the puck that indicates 50 game and 50 chat.Was this helpful? Thank you for your feedback!
-
The Harman Kardon Allure speaker listens for the hotword "Alexa", and when our speaker detects it then it will open up a connection to the Amazon server and store your search history on your account. You can mute the mircrophone by tapping the Microphone button on the Allure speaker, this will stop the speaker from listening and will not react to Alexa until you unmute it.Was this helpful? Thank you for your feedback!
-
In general, EQ shouldn’t affect localization — except in the case of the EQ being used very strongly.Was this helpful? Thank you for your feedback!
-
Yes, in two hours, you can charge it to approx. 6 hours of playing time.Was this helpful? Thank you for your feedback!
-
JBL QuantumSURROUND works with every game, but the experience is better when your game outputs in surround sound. If your game outputs only 2-channel audio, using JBL QuantumSURROUND will sound like a pair of studio monitors in front of you. You’ll be able to hear the reflections of the sound in the room, but as with any stereo setup, you won’t have any discrete sound sources behind you. With a full 7.1 mix, you’ll be able to hear and locate sounds behind and above you.Was this helpful? Thank you for your feedback!
-
The JBL Quantum ONE provides QuantumSURROUND via the USB connection on PC. You can download QuantumENGINE here: JBLQuantum.comWas this helpful? Thank you for your feedback!
-
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. The default setting of the mic monitoring is "OFF”.Was this helpful? Thank you for your feedback!
-
No, the JBL QuantumENGINE only supports x64 CPU Architectures.Was this helpful? Thank you for your feedback!
-
The JBL QuantumENGINE can run without internet connection, but it needs connection to download and install the software or firmware upgrades.Was this helpful? Thank you for your feedback!
-
No, the JBL QuantumENGINE only supports 64 bit Windows.Was this helpful? Thank you for your feedback!
-
There’s potentially more detail and spatial resolution in a 7.1 channel setup—and the more detail, the better the experience. However, JBL QuantumSURROUND will still work well with 5.1 output.Was this helpful? Thank you for your feedback!
-
No, this feature is not yet embedded into our Harman Kardon Allure speaker. Future updates might include this feature, therefore keep an eye on the release notes in our HK Alexa setup app.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream supports Spotify Connect, which can be used from the Spotify app if you have a premium account.Was this helpful? Thank you for your feedback!
-
Was this helpful? Thank you for your feedback!
-
It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )Was this helpful? Thank you for your feedback!
-
The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
General information about WiSA:
WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.
For more information on WiSA technology, please go to the official WiSA website.
If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".
Citation Surrounds
Current WiSA Certified products:
Citation Sub
Citation Sub S
Citation Towers
Citation Bar
Current products making use of WiSA technology:
Citation Multibeam 700
HK surround
WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.
Limitations:Was this helpful? Thank you for your feedback! -
To charge the headphones, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly. Battery life can last for 10-hours per charge. You may recharge your earphones for another 40-hours playtime with the charging case. It takes 2 hours to fully charge the charing case.Was this helpful? Thank you for your feedback!
-
No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.Was this helpful? Thank you for your feedback!
-
You have the option to turn the Noise Cancellation on and off by using the switch that is located on the right side of the NC box. When choosing the switch option, you will see a green light inside the the switch will indicate that the Noise Cancelation is on. To turn off the Noise Cancelation, move the switch down towards the cable and the green light will turn off. When charging this device with the micro USB charging cable included in the packaging, you will see the light turn orange to indicate that it is charging.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Message Us
Chat with a support agent via Whatsapp at:
91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)