No, since the speaker does not store any information locally. To remove all settings from your stolen device, simply unlink the speaker from your account, and the next time the speaker goes online it will not connect to your account. However, if you have used the command ""Remember this"" feature, please beware of sensitive information, as the speaker will inform you of whatever you have asked it to remember. But after unlinking the speaker, it will forget.

There will be times that the LEFT ear will disconnect from the RIGHT or (primary) earbud. To get the Left ear to reconnect, make sure that the RIGHT earbud is on and emitting sound. Take the LEFT ear out of the charging case and put in ear. Press and hold down the power button on the LEFT ear bud for 5-8 seconds. You should hear the power on chime and then both ear buds should emit sound now. 

No, your subwoofer is not defective at all! This is normal and by design of the product after it has been paired for a longer period of time.

We are sorry about this problem. EuP regulations require that electronics go into full off after some time. Unfortunately, this means that the soundbar cannot be woken up again after half an hour. It is necessary to use the ON/OFF switch.

We are sorry about this problem. EuP regulations require that electronics go into full off after some time. Unfortunately, this means that the soundbar cannot be woken up again after half an hour. It is necessary to use the ON/OFF switch.

Sounds like your JBL LINK 10 or LINK 20 has been connected to another Wi-Fi network. It is very simple to reconnect to your Wi-Fi by using the Google Home app. Simply select your Wi-Fi in the app, and you're all set. All information about the speaker and voice teaching is stored in the Cloud, so you do not have to do this again.

To install your JBL LINK speaker using Apple iOS... 1. Download the Google Home app. 2. Activate your Bluetooth connection, as it is required for Apple devices. 3. Follow the instructions in the Google Home app.

This headphone is supported by the My JBL Headphones App.

Some of the DJ EQ curves have been removed from the My JBL Headphones app. Harman will ‘continuously’ update the My JBL Headphones app with new DJ sound-curves as this number changes based on who we sign agreements with and when.

See the release notes for app version 4.10.9 below:
- Adding support for TOUR PRO+ TWS and TOUR ONE Global version
- Removing expired DJ’s signatures

With some phones, such as iPhones and some Android models, volume is synchronized while Bluetooth is used, and levels below volume setting 6 (tested with iPhone 6 and iPhone 5s) and volume setting 5 on most Android devices will cause the GO to enter standby after some minutes. If you want to play softer while still using your iPhone as a source, please change to cabled connection from the headphone output to the AUX input of GO. This will make it possible for you to set the GO's volume at its minimum step, and then control total level on the telephone. Of course, if source level from the telephone is set extremely low, the GO will go into standby again, because GO needs a certain level to keep playing. Alternatively, use a phone which does not synchronize volume as source. Many Android phones do not synchronize volume, so by using such a phone, you can adjust GO to its lowest level, adjusting total level independently, even via Bluetooth. This will usually result in music volume at the desired level.

Tap-hold on the right ear bud forcefully to reconnect heart rate. If this does not work, Hold the middle button to turn off, then back on your headphones.

If you are experience problems with reading any CD disc, please go to an authorized service center for help.

A certain degree of sensitivity is necessary to make the response system function. In some cases, hair or a cap touching the sensor plates can activate the system, even if you do not want it. The solution is to lock the sensor system. Put your finger on the left sensor plate, and hold it there for more than 4 seconds. Now the sensors are locked, and the problem is solved. Unlocking is done the same way.

The Go+Play Wireless must be in Standby to be able to switch On when receiving a signal. This function uses a small amount of power, and cannot be switched off. Remove batteries when not in use for more than 2 weeks to prevent power draining.

Sometimes after a system update, many Bluetooth connections and application handshakes no longer function. Therefore we advise to delete the existing pairing, and restart your smart device/telephone/tablet computer. After restart is completed, please connect to the product once again via Bluetooth. It should now be visible in our HK Remote app.

Fortunately the Go+Play in all versions is made with this problem in mind. One of the feet is adjustable. Look at the four feet. One is different from the others. You can insert a 3mm hex key into the center hole in it, then loosen the foot insert and unscrew it until the unit is steady. The adjustable insert may stick a little, so exert a steady, firm pressure to get it loose if this is the case.

Voice commands can only be triggered by the user who registered them during setup.

Yes, rinse it under a faucet or under the shower, but not under full water pressure.

Try below steps. Attach the charger so the device is charging. While charging: First try to hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds (this resets the Flip 3 to factory settings). If this does not help, press and hold the "Volume +" and "Link" buttons for more then 10 seconds (this will exit demo mode). As a last step, short press on the "Volume -" & "Volume +" & "Phone" buttons. If the device will still not turn on, it has a defect.

1. Insert both earbuds into the charging case.
2. Try to click 5 times on both left and right earbuds button simultaneously, to reconnect left and right earbuds.
 

Your JBL speaker is waterproof with IPX7 rating. (IPX7 means it can survive immersion in 1 meter/3.3 feet for up to 30 minutes.) To maintain the looks and functions of your speaker, please make sure to rinse it with fresh water after using it at a swimming pool or the ocean, then dry off all covers and areas where water can gather. The standard for waterproofing is for tap water. Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the surface finish over time if not rinsed off after use.

Make sure your home network's Internet connection is active and the Citation speaker is placed within Wi-Fi range. If you are using a Wi-Fi extender, your speaker may be confused which network to connect to. If this is happening, try moving the speaker closer to the main router and renaming the Wi-Fi extender.

This can be caused by many things. It could be obstacles between your device and router, or that your device has been placed too far away. To enhance the WiFi signal for your BDS, please make sure to place the included antenna on its threaded socket, then try search for any WiFi network again. If this still does not work, try moving your BDS closer to the router until connection is established, ensuring that the BDS WiFi network module is working. If nothing happens, the network module of the BDS or your router have a problem. In case you need more help, contact our support for more tips.

We always recommend to use the online updating tool inside BDS, as it is connected directly to our server and if new software are available, it will be there first. We are trying to update our website as quickly as possible.

Yes, playlists in these BDS units have an upper limit of 100 files.

If you have enabled HDMI-link (CEC function), then you will experience that your AVR will do some actions based on the CEC function coming from your TV, which in this case it will follow your TV when it goes into standby.

There are five possible reasons for the receiver shutting down. 1. There is a problem internally with the receiver. 2. There is a problem with one or more of your speakers. 3. There is a problem with one or more of your speaker wires. 4. There is a problem with the speaker wiring done on your system. 5. The unit is overheating. No ventilation. First, check the wiring at every speaker terminal at the back of your receiver and at the back of your speakers. A single strand of speaker wire crossing from one terminal to another would be enough to cause the amp to shut down or go into PROTECT. If you do not find any problems with any of the wiring, you should disconnect all speakers from your receiver. If the receiver continues to go into PROTECT, the problem is in the receiver. Please submit a case on the Contact Us page. They will be able to assist you. However, if it turns on, the problem is elsewhere. Begin reconnecting one speaker at a time. Eventually you will connect a speaker that will cause the receiver to shut down. At this point you have found your culprit. On the other hand, it may just be overheating. You must have at least 2 - 3 inches of space between the top of the unit and any shelf or component above the unit. The unit should not be inside a sealed compartment when being used. The unit must be able to breath. There are very powerful amps in these receivers. If they run too hot, they will shut down. An external fan can help this.

If you are experience connectivity problems with Wi-Fi connection, please try to reset all Wi-Fi settings. This can be done by pressing power button for 10 seconds, the power button will quickly flash to indicate it has been reset. After you have reset all Wi-Fi settings, please shutdown the device and pull out the power cable from the wall socket. Put back in the power cable into the wall socket and try do the Wi-Fi setup again.

To use the speaker as PC speaker, please make sure your PC supports our Bluetooth specifications and specifically A2DP Codec for Stereo Audio streaming

The Aura only goes from sleep mode to stand-by mode if you either press Power Off, or leave the Aura inactive for 30 minutes with no wifi connection established. Please note that the power light dims when Aura enters sleep mode, but extinguishes completely in stand-by mode. Please note that in both Sleep and Standby modes, Bluetooth remains active, and Aura will wake up if BT transmission is received.

You can create a multi-room setup using Chromecast built-in™ or Airplay, linking to other speakers with the same feature including the Harman Kardon Citation Series.

This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.

To connect to two devices at the same time:

1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection. 
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.

(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)


 

While using the Wired Aux Connection, the microphone will be switched off. 

Make sure both the QuantumENGINE software and the headset's firmware is updated to the most recent version, and that the microphone is plugged all the way in.

Below you can see the placements of the microphones on some of our headphone models:

Live Pro+ TWS


Tour Pro+ TWS


Tour One

If the wireless mic is out of signal range, you will experience drop outs or no sound. Once range is reestablished, the speaker should automatically detect the mic and resume connection within less than 3 sec. 

When a wireless mic is connected, the speaker will play a notification sound once. If two wireless mics are connected at the same time, there may be a 1 sec gap between the two notification sounds. 

If one of the wireless mics is not working, we recommend the following: 

1. Turn off the speaker
2. Turn on the mic and place it on top of the speaker
3. Turn on the speaker
4. The speaker should automatically pair with the new mic within 3 min and play a notification sound 
 

Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.

Microphone Cleaning (handheld mics)

There are two very important reasons to keep your microphone clean.

1. Hygiene/Germs, especially when a mic is used by multiple people, can unknowingly be spread.
2. Dried spit, dust, dirt and debris can build up in the screen and sponge, negatively affecting the microphones’ ability to accurately pick up and reproduce the voice or instrument.

 

To clean the microphone…

1. Remove/Unscrew the grille from the microphone, turning counter-clockwise.

2. Remove the foam from the inside of the grille.

3. Wash the foam with warm water and dish soap.
4. Clean the grille with any household non-abrasive disinfectant/cleaner.
5. Thoroughly dry both the grille and the foam.
6. Insert the foam into the grill.
7. Screw the grille back onto the microphone, turning clockwise.

 

NOTE: For quality purposes, it is recommended that the screen of the microphone be cleaned once per month when used on a regular basis. For hygienic purposes, when used by multiple people, cleaning is recommended more often, possibly even nightly.

Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. The default setting of the mic monitoring is "OFF”.

Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. And the default setting of the mic monitoring is set of “OFF”.

The speaker is IPX5 certified, it can withstand direct splashes from any direction for up to 3 minutes. Although a little snow or rain won't hurt it, we do not recommend keeping the speaker outside during rain and/or snow. Also be aware of extreme hot or cold temperatures, they may be damaging.

The Left and Right bud should sync together automatically when removed from the case. If the Left and Right bud do not sync together automatically within 15 seconds, you may manually sync the buds together. With the buds out of the case, press the center button on each bud 3x. This action does not have to be done simultaneously. You may start with either the L or R bud to initiate syncing.

LIVE PRO 2

Software Update Release Notes

------------------------------------------------------------------------

Version:  5.8.0

Release Date: December 1, 2023

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 

What’s New

1. Stability and performance improvement

------------------------------------------------------------------------ 

Version:  5.0.0

Release Date: September 13, 2023

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

What’s New

1. Add L/R balance feature support
2. Minor bug fixes for better user experience

 

LIVE FREE 2 TWS
Software Update Release Notes
------------------------------------------------------------------------
Software Version:  V6.9.8
Version (iOS):  V5.7.9
Version (Android):  V5.7.9
Release Date:  July 8, 2022
Release Media:  OTA via JBL Headphone App


What’s New

1. Added Microsoft Swift Pairing feature.
2. Fixed a few minor software bugs for better user experience.

LIVE FLEX 3

Software Update Release Notes

------------------------------------------------------------------------

Version:  Headphones 4.0.0 ; Charging Case 5.0.0

Release Date: February 21st, 2025

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 

What’s New

1. Add support for single earbud update, i.e. replacement earbud
2. Add Google Finder feature
3. Stability and performance improvements

------------------------------------------------------------------------

Version:  Headphones 2.8.0 ; Charging Case 4.2.0

Release Date: May 29, 2024

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 

What’s New

1. Improve call quality
2. Improve charging case unlock experience

LIVE FLEX

Software Update Release Notes

------------------------------------------------------------------------

Version:  5.8.0

Release Date: April 7th, 2025

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 

What’s New

1. Add support for Bluetooth LE Audio - LC3 codec

------------------------------------------------------------------------

Version:  4.3.7

Release Date: October 12, 2023

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 

What’s New

1. Google Audio Switch support

LIVE BEAM 3

Software Update Release Notes

------------------------------------------------------------------------

 Version:  Headphones 4.6.0 ; Charging Case 4.9.0

Release Date: April 1st, 2025

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 What’s New

1. Fixed issue where wallpaper would revert back to default

------------------------------------------------------------------------

 Version:  Headphones 4.5.0 ; Charging Case 4.8.0

Release Date: February 14th, 2025

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 What’s New

1. Performance improvements

------------------------------------------------------------------------

 Version:  Headphones 4.2.0 ; Charging Case 4.6.0

Release Date: September 25th, 2024

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

 

What’s New

1. Add 24-hour time format option
2. Stability and performance improvements

 

LIVE 770NC

Software Update Release Notes

------------------------------------------------------------------------ 

Version:  4.3.0

Release Date: May 17, 2024

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

What’s New

1. Google Audio Switch (AS) support
2. Stability & performance improvement

------------------------------------------------------------------------ 

Version:  3.9.0

Release Date: October 18, 2023

Release Media: OTA (over the air) Automatic Update through JBL Headphone App

What’s New

1. Improved wear detection function
2. Fixed battery level monitor feature in  JBL Headphone App
3. Fixed bugs

 

 

LINK MUSIC & LINK PORTABLE

Software Update Release Notes

------------------------------------------------------------------------

Version:  

23.51.21.50 Link Music

23.51.21.30 Link Portable

 

Release Date: June 12, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Fixed error message pop-up during Airplay setup

 

ANC (Active Noise Reduction) ON - Green light. ANC off - No light. Battery low - Blinking green. Charging - Red light. Charge compleate - Light off

If the left ear pod is silent, please perform a new pairing with the right pod like shown in the quick-start guide.
Take them out of the charging case and click the  center button on both the left and the right pod 3 times.
This forces a new pairing between the pods, and the left pod should automatically pair with the right pod from now on once you remove both pods from the charging case.

If you still cannot get the Left ear to play, please perform a factory reset by placing both pods in the charging case, while the charging case is charging. Now press the button on the right pod, and hold it for more than 5 seconds. You have now reset to factory settings. (Please note: If you have performed a factory reset, you will need to remove the headphones or "forget this device" from any smart phone or tablet they were once connected to. This will allow your device to now search for the newly restored headphones under BT devices)


The right pod is the primary, which is connected to your source, usually a smartphone.
The left pod is the secondary, which connects to the right pod.
 

The Checklist

Let us walk-through a list of things needed to ensure every requirement is met.

1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
   1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
   2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.

Watch the video below for help with setting up your Google Assistant device.

Wireless Network Extender

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.

1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

One Wireless Network Name (SSID)

1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.

 

The Checklist

Let us walk-through a list of things needed to ensure every requirement is met.

1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
   1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
   2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.

Watch the video below for help with setting up your Google Assistant device.

Wireless Network Extender

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.

1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

One Wireless Network Name (SSID)

1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the Wireless speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the Wireless connected speaker and Google Assistant request.

 

Yes, you can leave laptop connected to the charger even after it’s fully changed. The charger will charge your laptop again if needed. 

It is fine to leave the InfinityLAB charger plugged in the wall outlet when you are not using it. However even without charging your device, the charger will consume a little bit of power when connected to an active power source.

To save energy, suggest unplugging it from the wall outlet if you won’t use the charger for a long time.

When your phone/device is fully charged, the InfinityLab power bank will stop output (charging).

The JBL Xtreme will not be supported by the JBL Portable app while using Apple devices with iOS 14 or later versions due to incompatibility. 
You can continue to use the speaker through Bluetooth or Aux connection and manual pairing, but cannot stereo pair with another Xtreme through the JBL Portable App.  
There is no plan to release a new Firmware currently as the JBL Xtreme has been discontinued.

If you still wish to use JBL Xtreme with the JBL Portable app, please connect it with Apple devices with iOS 13 or below, or connect it with Android devices.

JBL Warranty Information
The limited warranty begins on the original date of purchase, and is valid only on products purchased from authorized resellers in the United States and used in the United States.
 

Warranty Period: Home Audio, Portables, Headphones

One year (except non-powered speakers, which are covered for five years)

Warranty Period: Car Audio, Marine, Powersports

One year
 

The following Car Audio premier product lines come with a three year warranty:
Stadium
StadiumGTO
Arena

NOTE: Warranty coverage can differ by model, please refer to the warranty card included with your product to check your coverage.

 

What is covered by the JBL warranty?

Unless a different warranty period is stated in the Warranty Card provided with your JBL product, JBL warrants for a period of 1 year (5 years for any non-powered speakers) from the date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a JBL authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. Refer to the Warranty Card provided with your JBL product for specific details including what is not covered along with other terms and conditions.
 
During the warranty period, the product or components will be repaired or replaced at JBL’s option, without charge for either parts or labor. Alternatively, JBL may decide at their sole discretion to refund the pro-rated portion of the original purchase price based on the remaining balance of the warranty period.
 
Any warranty service or replacement that is performed will not extend the original warranty period.
 

What is not covered by this warranty?

This limited warranty does not cover damage or failures that are a result of:

• Damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance)

• Damage to, or deterioration of, any accessory or decorative surface

• Damage resulting from failure to follow instructions contained in the owner’s manual.

• Damage resulting from the performance of repairs by someone other than an authorized JBL service center

• Deterioration of component parts, the nature of which is to become worn or depleted with use such as batteries and headphone ear pads

 

How to obtain warranty service?

Before requesting a replacement, you may read through our support materials and FAQs. If your questions are not answered, please reach out to our experts for personal assistance and troubleshooting. If you still need to replace your product, please follow these steps:
 

1. Have your purchase receipt or order confirmation handy

2. Please visit our support section to fill out the warranty exchange form.

The JBL Trip visor mount is bi-directional. Mount the clip to the other side of visor as shown in the “quick start guide” section 8. This will help displace the weight differently and your issue should be solved.

The JBL Tour Pro 2 allows you to find your preferred control method in any scenario. When you want to control your headphones, you no longer need to take your phone out, open the JBL Headphones app and wait for the headphones to connect in the app. All features are accessible directly on the Smart Case, where you can easily select any key feature, you know from the app.

Some of the features you can access on the Smart Case includes playing and pausing your music, skip to the next/previous track, volume adjustment, answer/reject calls, customize the EQ settings, Spatial audio, ANC and Ambient Sound Control, timer & clock, receive notifications, screensavers, and a battery indicator.