AVR 1710
700-watt, 7.2-channel networked AVR with AirPlay and Bluetooth connectivity
Introdução ao seu AVR 1710
Guia Rápido
Comece a utilizar seu produto rapidamente com nosso Guia de início rápido. Veja o guia de início rápido.
Registre seu produto
Você possui este produto? Registre-o aqui! E solicite sua garantia ou serviço facilmente
Registre agoraDocumentos & Downloads
Especificações de Produto
- Apple AirPlay
- Bluetooth
- Transient intermodulation distortion (TIM):
- Unmeasurable
- Power Consumption (full power/idle)
- <0.5W (standby); 510W maximum
- Stereo Power
- 100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
- Multichannel Power (all channels driven)
- 100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
- Input Sensitivity/Impedence
- 250mV/27k ohms
- Signal-to-noise Ratio (IHF-A) (dB)
- 100dB
- Surround system adjacent-channel separation:
- Dolby Pro Logic®/DPLII
- Frequency Response
- 10Hz – 130kHz (+0dB/–3dB)
- High Instantaneous Current Capability
- ±42 amps
- Slew Rate
- 40V/sec
- Frequency Range (MHz)
- 87.5MHz – 108.0MHz
- Usable Sensitivity (IHF)
- 1.3µV/13.2dBf
- Signal-to-Noise Ratio (Mono/Stereo dB)
- 70dB/68dB
- Distortion (Mono/Stereo)
- 0.2%/0.3%
- Stereo Separation @ 1kHz (dB)
- 40dB
- Selectivity (±400kHz):
- 70dB
- IF Rejection (dB)
- 80dB
- Image Rejection (dB)
- 80dB
- Frequency Range (kHz)
- 520kHz – 1710kHz
- Signal-to-Noise Ratio (dB)
- 38dB
- Usable Sensitivity (Loop)
- 500µV
- Distortion (1kHz, 50% mod):
- 1.0%
- Selectivity (±10kHz):
- 30dB
- Input Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Output Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Width (in)
- 17-5/16
- Width (mm)
- 440
- Height (in)
- 4-3/4
- Height (mm)
- 121
- Depth (in)
- 11-13/16
- Depth (mm)
- 300
- Weight (lb)
- 11
- Weight(kg)
- 5.1
- Television Format
- NTSC
- Video Frequency Response (Composite/S-Video)
- 10Hz – 8MHz (–3dB)
- Power Requirement
- 120V AC / 60Hz
700 watt audio/video receiver that boasts multiple wireless connectivity options, six HDMI inputs
Power, performance and more connectivity options than you’ll ever need: Introducing the Harman Kardon® networked AVR 1710, the answer to any entertainment enthusiast’s hunger for performance and versatility. It’s got muscle: up to 700 watts (100 watts per channel). Its 7.2-channel A/V receiver is equipped with HARMAN TrueStream Bluetooth® connectivity, Apple AirPlay, vTuner™ Internet radio and DLNA® 1.5 technology, giving you multiple options for streaming audio. And with six 3D-ready HDMI® inputs, including one equipped for MHL to connect mobile devices, and two HDMI outputs, you’ll have more than enough ways to connect to everything you love – movies, HDTV, sports, MHL-equipped devices and the Roku Streaming Stick™ dongle. While the AVR 1710’s connectivity alone makes it desirable, its sound really strikes a chord. It’s the first Harman Kardon AVR to feature our exclusive Natural Sound Processing (NSP), which creates a rich, enveloping surround-sound from any source – particularly with two-channel streaming content. And its EzSet/EQ™ III system automatically calibrates the AVR to your speakers and listening environment. The AVR 1710 is light, too, thanks to HARMAN GreenEdge™ certification – delivering all the power you need with low environmental impact. For those who want it all, the AVR 1710 can’t be matched.<CRLF><CRLF>
The AVR 1710 high-performance audio/video receiver pumps out 100 watts per channel to power a full seven-channel surround-sound system. It can also connect to two powered subwoofers to provide enhanced low-frequency performance for all your entertainment. While the amplifier retains the time-tested, high-current-capacity (HCC), ultrawide-bandwidth Harman Kardon design to ensure the most accurate, dynamic sound with enhanced clarity and realism – even at the highest listening levels – a digitally based power supply gives the amplifiers all the muscle they need without the weight of traditional power-supply designs and their heavy transformers. The net result is a great-sounding AVR in a small form factor that’s friendly to the environment.
The AVR 1710 can stream audio from virtually any portable device. For Apple devices, such as computers and the iPad, iPhone and iPod touch, you can stream using the receiver’s built-in AirPlay technology. (AirPlay, vTuner and DLNA connections require a wired connection to a broadband network.) For other tablets, smartphones and laptops, you can take advantage of the AVR 1710’s integrated HARMAN TrueStream Bluetooth technology. A USB port is included on the front of the AVR so you can connect devices directly without an external adapter or a wireless connection. The AVR is also DLNA 1.5 compliant, which gives you multiple options for delivering content over your home network.
The HARMAN TrueStream guarantee ensures the best possible listening experience when you stream audio wirelessly via Bluetooth technology. HARMAN TrueStream tech selects the most current, most advanced wireless option to ensure the highest-quality sound, no matter what application or source device you use.
Six HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it. And with the AVR’s MHL (Mobile High-Definition Link), you can deliver high-definition audio/video content from your camera, phone, tablet or Roku Streaming Stick dongle directly to your HDTV via the AVR 1710’s MHL connection.
Is your listening room so large that you need two subwoofers to deliver the bass that you desire? That’s not a problem with the AVR 1710, thanks to dual subwoofer outputs that give your system a big-time boost in low-frequency clarity and realism when needed.
Control the audio in separate rooms with a single receiver. Thanks to the AVR 1710’s assignable amplifiers, you can power the audio in a second room without adding additional components. That means you can watch sports in one room while you play the soothing sounds of classical music in another.
The AVR 1710 gives you multiple options for audio playback with its front-panel USB port. Simply connect an iPhone, iPad, iPod or USB stick to play your stored tracks through your home entertainment system. The integrated USB port also charges your iOS devices.
The AVR 1710 takes the award-winning Harman Kardon look to a new level with a flush volume control and a more compact design aesthetic than earlier AVRs. Thanks to its light weight, made possible by an advanced digital power supply, the unit weighs less without sacrificing performance. It’s the perfect match for the thin glass shelves of today’s open TV/entertainment furniture.
The AVR 1710 delivers high-resolution audio that matches the digital-video quality of Blu-ray Disc™ formats, unlocking the full potential of movie soundtracks formatted with Dolby® TrueHD and DTS-HD Master Audio™ coding. No matter what mode or mood you are in, you’ll always hear audio playback at its finest.
The new HARMAN EzSet/EQ III auto-calibration process precisely adjusts the AVR 1710’s volume levels, speaker-distance/delay-time settings and equalization to optimize audio performance automatically for your specific speaker system and room conditions. The system features an easy-to-follow menu display and includes a plug-in calibration microphone.
Perguntas Frequentes & How-Tos
3 resultados
-
Há cinco possíveis razões para o receptor não estar funcionando. 1. Há um problema interno no receptor. 2. Há um problema em um ou mais de seus alto-falantes. 3. Há um problema em um ou mais fios de seu altos-falantes. 4. Há um problema com a fiação do alto-falante em seu sistema. 5. A unidade está superaquecendo. Sem ventilação. Primeiro, verifique a fiação em cada terminal do alto-falante na parte traseira do receptor e na parte traseira de seus alto-falantes. Um único fio com os cabos do alto-falante cruzando de um terminal para outro é suficiente para que o amplificador pare de funcionar ou entre no modo de PROTEÇÃO. Se você não encontrar nenhum problema com qualquer uma das fiações, deverá desconectar todos os alto-falantes do receptor. Se o receptor continuar a entrar em no modo de PROTEÇÃO, o problema está no receptor. Informe-nos sobre o caso pela página Entre em contato conosco. Eles poderão ajudá-lo. Contudo, se ele liga, o problema está em outro lugar. Comece reconectando um alto-falante por vez. Eventualmente, você conectará um alto-falante que fará com que o receptor pare de funcionar. Nesse ponto, você terá descoberto o problema. Por outro lado, pode ser apenas superaquecimento. Você deve ter pelo menos de 2 a 3 polegadas de espaço entre a parte superior da unidade e qualquer prateleira ou componente acima da unidade. A unidade não deve estar dentro de um compartimento fechado quando estiver em uso. A unidade precisa de ventilação. Há vários amplificadores poderosos nesses receptores. Se ficarem muito quentes, eles pararão de funcionar. Um ventilador externo pode ajudar.Isto foi útil? Obrigado pela sua resposta!
-
Sim, isso está correto. O AVR171, 171S, 1710 e 1710S oferece suporte para OSD somente na saída HDMI 1. HDMI 2 não exibe o OSD. O AVR370 e 3700 oferece suporte a OSD em ambas as saídas HDMI.Isto foi útil? Obrigado pela sua resposta!
-
Sim. No computador, digite o endereço IP do receptor no navegador da internet. Na página exibida, é possível alterar o nome.Isto foi útil? Obrigado pela sua resposta!
Imagens e Vídeos
Não encontrou o que estava procurando?
Devido às enchentes no estado do RS, os pedidos de todos território nacional podem sofrer atrasos na entrega.
Telefone
Fale com um especialista em produtos
Ligue para:
0800 571 4161
0800 571 4161 (Ligação gratuita para Telefone Fixo)
(41) 3012-6100 (Custo de ligação Local / Interurbana)
Segunda a Sexta das 08h às 18h, exceto feriados
Chat
Segunda a Sábado das 08h às 18h, exceto feriados
Nos envie uma mensagem através do número (41) 2169-6702 ou clique no link:
Segunda a Sábado das 08h às 18h, exceto feriados