JBL Club 700BT
Trådløse on-ear hovedtelefoner
Sold from 2019 until now
Getting started with your JBL Club 700BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 40
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 100
- Dynamisk frekvensområde (Hz)
- 16 Hz - 22 kHz
- Impedans (ohm)
- 32
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Dybde (cm)
- 1.5
- Ear Cup Depth (in)
- 0.6
- Højde (cm)
- 7.5
- Ear Cup External Height (in)
- 3
- Bredde (cm)
- 7.5
- Ear Cup External Width (in)
- 3
- Indre bredde (cm)
- 3.9
- Ear Cup Internal Height (in)
- 1.5
- Indre højde (cm)
- 3.9
- Ear Cup Internal Width (in)
- 1.5
- Hovedtelefonernes kabel-længde (m)
- 1
- Headphone Cable Length (ft)
- 3.3
- Vægt (g)
- 283
- Vægt (oz)
- 9.98
- Bluetooth-profiler
- A2DP 1.3, AVRCP 1.5, HFP 1.6
- Bluetooth-frekvens
- 2.402 GHz - 2.480 GHz
- Bluetooth sender-modulation
- GFSK, _x001F_/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- <4 dbm
- Bluetooth-version
- 5.0
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 50
- Bluetooth
- Ja
- Stemmeassistent
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Stofpose
- Ja
- Håndfri opkald
- Ja
- On-ear
- Ja
- Genopladeligt batteri
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Trådløse
- Ja
On-ear Bluetooth hovedtelefoner, der leverer lyd og ydelse i høj kvalitet
Suveræne detaljer, så du ikke går glip af en eneste tone. Dunkende, føl-det-i-dine-tæer bas med et tryk på en knap. DJ-forudindstillinger giver fuld kontrol over lyden. JBL CLUB 700BT-hovedtelefonerne er inspireret af professionelle kunstnere og leverer fremragende lyd i høj opløsning, der sætter dig i samme rum som dine favoritmusikere. Med et superkomfortabelt on-ear-design og funktionerne Ambient Aware og TalkThru plus kompatibilitet med Google Assistent og Alexa er det nemt at holde gang i festen.
Du behøver ikke billet til forreste række for at opnå samme lytteoplevelse. Lyd i høj opløsning og den legendariske JBL Pro Sound giver dig en bred vifte af detaljer og klarhed. Fordyb dig i lyden med de samme effekter, som da dine yndlingsartister skabte musikken.
Du behøver ikke nørde rundt med knapper for at få lyden helt rigtig. Tryk blot på den dedikerede knap på højre øreprop for et øjeblikkeligt basboost.
JBL CLUB 700BT-hovedtelefonerne er designet til at fordybe dig i musikken med polstrede ørekopper, der føles som om, de næsten ikke er der.
Du skal ikke bekymre dig om genopladning. Med 50 timers Bluetooth-spilletid får du brug for en pause, før disse hovedtelefoner stopper.
Du kan stadig høre lyde fra omgivelserne med Ambient Aware og TalkThru. Vær sikker i trafikken, og tal med andre uden at fjerne dine hovedtelefoner.
Tag dine JBL CLUB 700BT-hovedtelefoner med dig overalt. De er sammenklappelige og bærbare, så du kan tage dem med dig, uanset hvor din dag (eller nat) går hen, og de passer nemt i din taske.
Ikke mere søgen efter fred og ro for at besvare et opkald. Dual-mic teknologien på JBL CLUB 700BT fjerner støj fra omgivelserne under opkald, så du kan telefonere overalt. Håndfri opkald og trådløs musik fungerer gnidningsløst takket være Bluetooth 5.0, så hovedtelefonerne altid er med dig på farten.
Send en sms, afspil din foretrukne playliste eller tjek vejrudsigten, alt sammen uden at røre telefonen. Vælg Google Assistent eller Amazon Alexa i appen My JBL Headphones, så er din stemmeassistent klar til at håndtere alt dette og meget mere. Du skal blot trykke på venstre ørekop.
(*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
JBL har samarbejdet med nogle af verdens bedste DJs for at gengive lyden fra deres personlige studier, så du kan høre dine yndlingsmusik, præcis som de gør. Tryk blot på knappen STAGE+ i appen My JBL Headphones for at vælge mellem DJ-forudindstillingerne.
Du ved, hvordan du vil have din musik. Det gør JBL også. JBL Club 700BT hovedtelefonerne er udstyret med Personi-Fi. I få enkle trin kan du med Personi-Fi skræddersy din lydprofil baseret på køn, alder og præferencer, så du får den bedst mulige lytteoplevelse. Du finder Personi-Fi i seneste version af den gratis My JBL Headphones-app.
FAQs & How-Tos
19 results
-
A dedicated bass boost button located on the RIGHT ear cup on the CLUB 950NC & 700BT increases low-end frequencies of 5-6 dB adding a kick to your favorite tracks.Was this helpful? Thank you for your feedback!
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
JBL Club headphones do not support aptX. There are a number of different platforms available and our choice was driven by the one that provides the combination of best sound quality and user experience. The platform that we have selected perfectly fits the requirements of the JBL Club series including voice integration and audio customization whilst supplying the Hi Res-certified headphones with the quality of audio they deserve.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks two colors, and now you have reset to factory settings.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
