Dokument och hämtningar
Produktspecifikationer
- MSRP U.S.
- $529.95 each
- Dimensions (H x W x D)
- 4-13/16 (w/legs) x 17-3/8 x 14-1/2 (w/knobs,antenna)
- Usable Sensitivity
- FM MONO – 1.8uV
- Quieting Sensitivity
- MONO -3.0uV
- Quieting Sensitivity
- STEREO -35uV
- Signal-to-Noise Ratio
- FM STEREO – -75dB
- Capture Ratio
- FM... 1.0dB
- Alternate Channel Selectivity
- AM... 50dB
- Alternate Channel Selectivity
- FM... 75dB
- IF Rejection
- 100dB AM – 25dB
- AM Rejection
- FM... 65dB
- Stereo Separation
- 48dB 1kHz
- Total Harmonic Distortion
- FM MONO -0.09% 1kHz, 100% modulation
- Total Harmonic Distortion
- FM STEREO -0.1% 1kHz, 100% modulation
- Sensitivity
- AM... AM – 300uV/m
- Selectivity
- AM -
- Image Rejection
- AM – 40dB
- Amplifier Power (RMS)
- 45 watts per channel @ <0.03% THD primarily low order harmonics @ 8 ohms from 20Hz – 20kHz
- Power Bandwidth
- HALF POWER – <10Hz – 60kHz with 8 ohms
- Frequency Response
- < 1Hz – 150kHz (+0/– 3dB @ rated output)
- Total Harmonic Distortion
- 0.02% primarily low order harmonics 1kHz @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.09% @ rated output
- High Instantaneous Current Capability (HCC)
- ± 20 Amps
- Slew Rate
- 65 volts/uSec
- Rise Time
- SQUARE WAVE – better than 1.9uSec @ 20kHz
- Square Wave Tilt
- < 3% @ 20Hz
- Negative Feedback
- 25dB
- Damping Factor
- >50 @ 8 ohms, 20Hz – 20kHz
- Hum and Noise
- PHONO – -85dB A-WTD
- Hum and Noise
- AUX – -90dB A-WTD
- Input Sensitivity
- PHONO – 2.2mV AUX -150mV
- Phono Input Sensitivity
- RESISTANCE – 47k ohms
- Phono Input Sensitivity
- CAPACITANCE – 125pF
- Phono Overload
- >130mV
- RIAA Equalization
- ±0.75dB
Stereo Receiver (45 watts x 2)
Bilder och videor
Hittade du inte det du sökte efter?
Ring oss
Ring oss på:
+46 850512632
Måndag – fredag: 09:00-17:00
Skicka e-post till oss
Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!
Chatta med oss
Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00