AVR 1610

AVR 1610

425-watt, 5.1-channel, networked AVR with Bluetooth connectivity

Komma igång med din $produkt

Komma igång med din $produkt

Snabbstartsguide

Kom igång på nolltid med vår snabbstartsguide som är lätt att följa

Product Registration

Registrera din produkt

Äger du den här produkten? Registrera dig här! Och gör anspråk på din garanti eller service på ett enkelt sätt

Registrera nu

Dokument och hämtningar

Produktspecifikationer

Bluetooth
Multichannel Power (all channels driven)
85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, less than 0.1% THD
Transient intermodulation distortion (TIM):
Unmeasurable
Power Consumption (full power/idle)
less than 0.5W (standby); 450W maximum
Stereo Power
85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, less than 0.1% THD
Input Sensitivity/Impedence
250mV/27k ohms
Signal-to-noise Ratio (IHF-A) (dB)
100dB
Surround system adjacent-channel separation:
Dolby Pro Logic®/DPLII: 40dB; Dolby Digital: 55dB; DTS®: 55dB
Frequency Response
10Hz – 130kHz (+0dB/–3dB)
Slew Rate
40V/sec
Frequency Range (MHz)
87.5MHz – 108.0MHz
Usable Sensitivity (IHF)
1.3µV/13.2dBf
Signal-to-Noise Ratio (Mono/Stereo dB)
70dB/68dB
Distortion (Mono/Stereo)
0.2%/0.3%
Stereo Separation @ 1kHz (dB)
40dB
Selectivity (±400kHz):
70dB
Frequency Range (kHz)
520kHz – 1610kHz
Signal-to-Noise Ratio (dB)
38dB
Usable Sensitivity (Loop)
425µV
Distortion (1kHz, 50% mod):
1.0%
Selectivity (±10kHz):
30dB
Input Level/Impedence (ohm)
1Vp-p/75 ohms
Output Level/Impedence (ohm)
1Vp-p/75 ohms
Width (in)
17-5/16
Width (mm)
440
Height (in)
4-3/4
Height (mm)
121
Depth (in)
11-13/16
Depth (mm)
300
Weight (lb)
10
Weight(kg)
4.6
Image Rejection (dB)
80dB
IF Rejection (dB)
80dB
Television Format
NTSC
Video Frequency Response (Composite/S-Video)
10Hz – 8MHz (–3dB)
Power Requirement
120V AC / 60Hz

This 425-watt, high-performance, 5.1-channel A/V receiver gives you more ways to connect!

There are countless ways to access and store your favorite media, from external hard drives to set-top cable boxes to smartphones. But if your home audio/video receiver doesn’t give you options for connecting to those media, it’s borderline useless. The Harman Kardon® AVR 1610 gives you a simple way to connect to everything you love. This 425-watt, 5.1-channel, networked audio/video receiver is loaded with options that let you access your media. It features five 3D-ready HDMI® inputs, including one compatible with MHL, so you’ll have more than enough ways to access content on your HD cable box, Blu-ray™ player, MHL-equipped portable devices or Roku Streaming Stick™ dongle. It also includes DLNA® 1.5 networking and HARMAN TrueStream Bluetooth® technology so you can stream high-fidelity audio from your mobile devices. Regarding sound, the AVR 1610 features our exclusive Natural Sound Processing (NSP), which creates a rich, enveloping sound from any source – particularly with two-channel streaming content. And to get the very best sound based on your speakers and listening environment, its new EZSet/EQ™ III process automatically calibrates the system. And with HARMAN GreenEdge™ technology, the AVR 1610 is environmentally friendly, too.

The AVR 1610 high-performance audio/video receiver pumps out 85 watts per channel to power a full five-channel, networked surround-sound system. It can also connect to a powered subwoofer to provide enhanced low-frequency performance for all your entertainment. While the amplifier retains the time-tested Harman Kardon high-current capacity (HCC), ultrawide-bandwidth amplifier design to ensure the most accurate, dynamic sound with enhanced clarity and realism, even at the highest listening levels, a digitally based power supply gives the amplifiers all the wattage they need without the weight of traditional power-supply designs and their heavy transformers. The net result is a great-sounding AVR in a small form that is friendly to the environment.
The AVR 1610 can stream audio from virtually any portable device. You can connect and charge Apple devices such as an iPad, iPhone or iPod touch directly to the front-panel USB jack and play back without the need for an external adapter. For other tablets, smartphones and laptops, you can take advantage of the AVR 1610’s integrated HARMAN TrueStream Bluetooth technology. The AVR is also DLNA 1.5 compliant, which gives you more options for delivering content over your home network.
The HARMAN TrueStream certification ensures the best possible listening experience when you stream audio wirelessly via Bluetooth technology. HARMAN TrueStream tech delivers the most current, most advanced wireless-option to ensure the highest-quality sound, no matter what application or source device you use.
The AVR 1610 features vTuner Internet radio to connect you to a whole world of online audio entertainment. As soon as it’s out of the box, you can stream over-the-air radio stations from around the globe as well as stream from a wide range of Internet-only radio stations.
Five HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it.
The AVR 1610 gives you multiple options for audio playback with its front-panel USB port. Simply connect an iPhone, iPad, iPod or USB stick to play your stored tracks through your home entertainment system.
Whether it’s captured by your camera, phone or tablet, or streamed from a Roku Streaming Stick dongle, you can deliver high-definition audio/video content directly to your HDTV via the AVR 1610’s MHL connection.
The AVR 1610 delivers high-resolution audio that matches the digital video quality of Blu-ray Disc™ formats, unlocking the full potential of movie soundtracks formatted with Dolby® TrueHD and DTS-HD Master Audio™ decoding. No matter what mode or mood you are in, you’ll always hear audio playback at its finest.
The new HARMAN EzSet/EQ III auto-calibration process precisely adjusts the AVR 1610’s volume levels, speaker distance/delay time settings and equalization to optimize audio performance automatically for your specific speaker system and room conditions. The system features an easy-to-follow menu display and includes a plug-in calibration microphone.
The HARMAN GreenEdge logo assures you that the AVR 1610’s design is environmentally friendly without compromising the premium performance for which HARMAN products are known. Thanks to an advanced power supply, the AVR 1610 can deliver high-quality audio in a smaller, lighter chassis that uses less metal and plastic. The smaller design means that less fuel is used in transportation, with the end result being a lower carbon footprint.
The AVR 1610 takes the award-winning Harman Kardon design look to a new level with a flush volume control and more compact design. Thanks to the light weight made possible by an advanced digital power supply, the unit weighs less without sacrificing performance so that it is the perfect match for the thin glass shelves of today’s open TV/entertainment furniture.
All connections on the AVR 1610 are color-coded to simplify hookup and reduce errors. Color-coded binding-post speaker terminals on all output channels accept banana plugs (North America only), pin connectors or bare wire to provide secure links for your speaker cables.
The AVR 1610 simplifies your life with a programmable infrared (IR) remote control. It works seamlessly with the receiver’s multilingual on-screen display, guiding you through system setup and operation with consummate ease. The multidevice remote can also control your TV, cable boxes, satellite tuners and other playback sources. For further installation flexibility, there is a 12-volt trigger output and a remote IR sensor input.
Taking control to the next level, the Harman Kardon Remote app is available from the iTunes App Store for iOS® devices and the Google Play™ service for compatible Android™ products. It will let you use your compatible smartphone or tablet to drive the AVR 1610 without picking up the remote.

Vanliga frågor och Så här går det till

1 resultat
  • HDCP (High Definition Copy Protection) 2.2 blir obligatoriskt för 4K/UHD-innehåll enbart. Första källan blir 4K BD-spelaren från Samsung, som presenterades vid IFA under våren 2016. Vid HDCP 2.2 måste hela kedjan vara kompatibel med arbete från källa till AVR till tv. Om en av enheterna i kedjan inte är HDCP 2.2-kompatibel, kommer spelaren att skala ned innehållet till 1080p. Ingen svart skärm. Detta är åtminstone teorin. HDCP 2.2 är kopieringsskyddad, så det avkodar inte signalen, utan handlar om att förhindra att innehållet kopieras och distribueras på internet. Problemet med HDCP 2.2 är att det är hårdvarubaserat och inte programvarubaserat, så det finns inget som vi kan göra på våra befintliga modeller, som för alla andra AVR-tillverkare eller tv-apparater. Observera att självproducerat 4K-material inte är något problem, eftersom självproducerat material inte har något digitalt HDCP-kopieringsskydd. Det är endast strömmat material och UHD-Blu-ray som inte fungerar, eftersom HDCP-skyddet stoppar signalen i mottagaren.

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00