AVR 132

AVR 132

AVR 132 AV RECEIVER

Såld från 2006 tills 2007

Tillverkade i: China

Dokument och hämtningar

Produktspecifikationer

Power Requirements
AC 220 – 240V / 50Hz
Power Consumption
72W idle, 580W maximum (5 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-/8-channel input
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
No
Remote Control
Seven-device, programmable remote
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
40 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
30 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, Back)
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
440mm
Height
165mm
Depth
382mm
Weight
9.6kg
Dimensions:
Television Format
PAL/NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 50MHz (–3dB)
Frequency Range
AM... 522 – 1620kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/65dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.15/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 35dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
30W x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

The AVR 132 brings new life to movies and music, thanks to a wide variety of 5.1-channel decoding and processing modes, including Dolby Digital, Logic 7 and DTS. Multiple inputs and outputs let you connect to any analog or digital source, including component video. With the AVR 132, your speakers never heard it so good!

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00