JBL CBT 70JE-1

JBL CBT 70JE-1

Extension for CBT 70J-1 Line Array Column Speaker

Komma igång med din $produkt

Komma igång med din $produkt

Snabbstartsguide

Kom igång på nolltid med vår snabbstartsguide som är lätt att följa

Product Registration

Registrera din produkt

Äger du den här produkten? Registrera dig här! Och gör anspråk på din garanti eller service på ett enkelt sätt

Registrera nu

Dokument och hämtningar

Produktspecifikationer

Components
Four (4) 130 mm (5 in) LF drivers
Frequency Range (-10 dB)
45 Hz – 700 Hz
Sensitivity (2.83V @ 1m)
90 dB full space, 96 dB half-space (65 Hz - 300 Hz)
Nominal Impedance
8 ohms
Power Capacity
500 W (2000 W peak), 2 hrs ; 350 W (1400 W peak), 100 hrs
Max SPL
117 dB
Outdoor Capability
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
Mounting
Coupler plate joins the CBT70J-1 and 70JE-1 end-to-end. Threaded points on coupler plate accepts OmniMount™ 60.0 Series and 120.0 Series compatible wall-mount brackets, as well as points for the swivel (pan)/tilt wall bracket that is included with CBT 70J-1. Twelve (12) additional M6 mounting points accept forged shoulder steel eyebolts or swivel clips for suspension.
Included Accessories
Coupler plate
Optional Accessories
MTC-PC2 terminal panel cover ; MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty speaker stand (must be heavy-duty stand for stability with this array) ; MTC-CBT-FM2 flush-mount low-profile wall-mount bracket
Dimensions (H x W x D)
27.4” x 6.7” x 9.3” (69.4 cm x 17 cm x 23.7 cm)
Weight
18 lb (8.2 kg)
Net Weight
8.2 kg (18 lb)
Enclosure
Fiberglass-reinforced ABS cabinet, painted aluminum grille

Extension for CBT 70J-1 Line Array Column Speaker

The CBT 70JE-1 cabinet contains four low frequency drivers and a crossover network purposely designed for use in the CBT 70J-1 + 70JE-1 System, in a tough fiberglass-reinforced ABS enclosure. The 500W power handling and high sensitivity delivers powerful low frequency output. The drivers have lightweight dual magnet neodymium motors with 38 mm (1.5 in) diameter voice coils. The dual-magnet system provides maximum flux in a compact package. The magnet structure is magnetically shielded and the pole tips are magnetically saturated for lower flux modulation and minimum distortion. The 16 mm (0.63 in) long coils provides high linear drive and high power handling in a compact driver. The drivers feature damped blended surrounds and coated sealed paper cones found in high performance large format drivers. Drivers feature coated diaphragm materials to provide moisture, UV and salt resistance for outdoor capability. The thick, heavy-duty aluminum grille stands up to portable/event applications while allowing for rust-free installation outdoors.

For combining with CBT 70J-1
To 400 Hz for ± 20° control, to 200 Hz for substantial off-axis cancellation (when combined with CBT 70J-1)
To 45 Hz when combined with CBT 70J-1

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00